Replace or Fix Carb Recommendation?

[peterpillsbury]

Help! I installed this over a year ago on my 64 Scout80 196ci and it worked great until it didn't. It barely survived IHWR this year and I want it to work for next year!

https://scoutparts.com/Carburetor_2_Bar ... 800/p18510 - Manual Choke.

Do I get this one fixed or just try again with a better setup?

When running it was either too much fuel or not enough. The hotter and longer it ran the more fuel it demanded and the worse it got in terms of stalling every-time I got to a stop sign. Now it no longer runs . Also, as you can see - fuel all over the place.

Thanks! in advance.

IMG_0511.JPG (4.07 MiB) Viewed 4958 times

IMG_0510.JPG (3.56 MiB) Viewed 4958 times

IMG_0512.JPG (3.76 MiB) Viewed 4957 times

[Big John]

1st. Is that a 196 or a 152?
If it's the stock carb even if not run a thick carb gasket between the carb and manifold. That will help with some heat transfer from manifold to carb.

[peterpillsbury]

Thanks for Feedback!

It's a 196 and it turned out that the fuel tank was filled with rust and sludge. So the carb was also filled with sludge and rust that got through filter. We cleaned out the fuel tank, new lines and a new carb. Runs great now! Just needs tuning.

Next Up: I now needs a new Clutch! Any recommendations on which and where to buy?

[greenbean]

Classicscoutparts.com