Hi all,
I have rear dana 44 with 3.73 gear ratio on a 1968 scout 800 v8 4x4.
I need help with parts...
NEED rear hardware for brakes plus shoes/pads.
also brake wheel cylinders.
Im in Gilroy, ca
Brake parts for rear dana 44
-
ONTHEROADAGAIN
- Newbie

- Posts: 2
- Joined: Wed Mar 15, 2023 9:21 pm
- Vehicle(s): 1968 scout 800
- ShaunT
- Full Tank

- Posts: 110
- Joined: Fri Jan 20, 2017 6:15 pm
- Location: Orange County, CA
- Vehicle(s): 74 Scout II. Orange Crush
Re: Brake parts for rear dana 44
You can find kits for the appropriate parts on line or any major auto parts store
- Wmontaney
- Three-quarter tank

- Posts: 76
- Joined: Sun Jan 22, 2017 3:23 pm
- Location: San Diego
- Vehicle(s): 1978 SSII
- Contact:
Re: Brake parts for rear dana 44
Is this your stock rear axle or another from like a Scout II? Brake shoes are different sizes between 800 (11"x1.75") and 74-80 Scout II (11"x2.25").ONTHEROADAGAIN wrote: Wed Mar 15, 2023 10:01 pm Hi all,
I have rear dana 44 with 3.73 gear ratio on a 1968 scout 800 v8 4x4.
You need shoes or pads? There is a difference. Did you do a disk conversion in rear to require pads?
Fronts would be pads with disk brakes, rears would be shoes with drum brakes.
I just ordered all my brake components, front pads, rear shoes, wheel cylinders and new hardware from Rockauto.
Bill--
San Diego Chapter
KJ6WJL
1978 SSII
San Diego Chapter
KJ6WJL
1978 SSII
-
ONTHEROADAGAIN
- Newbie

- Posts: 2
- Joined: Wed Mar 15, 2023 9:21 pm
- Vehicle(s): 1968 scout 800
Re: Brake parts for rear dana 44
yes, no pads, shoes... I will check rock auto.
thank you
thank you